Click for more products.
No products were found.
Your shopping cart is empty.

PRODUCTS

Filter By
Filter By
Truck Manufacturer
Truck Model
Article No
OE Part No
Type of Wheel
Type of Castors
Load Capacity
Wheel Diameter
Wheel Width
Bore Hole Diameter
No. of Bore Holes
Pitch Circle Diameter (PCD) of Bore Hole
Shore Hardness
Tread Width
Fixing Length
Hub Length
Bearing Inner Diameter
Tread
Weight
Overall Height
Top Plate
Bolt Holes Position
Centre Bore

Wheels and Castors

AVM Diesel supplies the full Räder-Vogel wheel and castor range in Singapore. The three families sit below: forklift wheels (load and drive wheels for lift trucks), industrial wheels (large, high-load wheels for conveyors, machinery and AGVs) and castors (swivel, fixed and braked units for trolleys and equipment). Räder-Vogel has been manufacturing wheels in Germany since 1946; AVM is their official Singapore distributor with technical support. Choose a category below, or send us your load and wheel size for a recommendation.

Browse Sub-Categories

  • Forklift Wheels

    Forklift Wheels

    Forklift wheels are the wheels on lift trucks — forklifts, stackers and lifters. There are two roles: the load wheel at the front, which carries the weight, and the drive wheel at the rear, which moves the truck. Choose rubber for outdoor use and polyurethane for indoor floors, where it gives better stability and protects the surface. AVM supplies Räder-Vogel forklift wheels to fit common truck makes — send us the part number or the truck model (e.g. Linde, Still, BT/Toyota) and we will match the exact wheel.

    Forklift wheels are one family within our full wheels and castors range. For larger, higher-load wheels, see our industrial wheels.

  • Industrial Wheels

    Industrial Wheels

    Industrial wheels — also called machinery wheels or heavy equipment wheels — are generally higher-load wheels used on conveyor systems, monorails, AGVs and heavy machinery. AVM supplies Räder-Vogel industrial wheels that carry very high loads; sizes come from 5.5cm to over 1.6 m in diameter. Wheel materials are matched to the job — polyurethane, premium Vulkollan, nylon or rubber — depending on load, floor and conditions. Send us the wheel size and load for the right specification.

    Industrial wheels are part of our full wheels and castors range. For trolley and equipment units instead, see industrial castors; for lift-truck wheels, see forklift wheels.

  • Industrial Castor Wheels

    Industrial Castor Wheels

    Castors are wheel units fitted under trolleys, racks and equipment so a load can be moved by hand or towed. AVM Diesel supplies industrial castors in three actions — swivel (turns freely), fixed (runs straight) and braked (locks in place). Wheels come in rubber for outdoor use and polyurethane for smooth, floor-friendly indoor use. For heavier loads we also supply twin-wheel and heavy-duty braked castors. Sourced from Räder-Vogel (German-made, in business since 1946), the wheels are reliable for all loads and sizes. Tell us your load, floor type and wheel size and we will match the right castor. (Also spelled caster wheels / casters in the US.)

    Looking for larger wheels for machinery or heavy equipment rather than trolley castors? See our industrial wheels range, or browse the full wheels and castors category.

Filter By

Frequently asked questions

What is the difference between a wheel and a castor? A wheel just rolls; a castor is a wheel in a bracket (swivel, fixed or braked) fitted under equipment so it can be steered.

What loads can these wheels carry? From light trolley castors up to heavy industrial wheel sets used on machinery and conveyors. Tell us the load for a match.

Browse each family: forklift wheels, industrial wheels and industrial castors — all from Räder-Vogel.

Menu

Settings

Click for more products.
No products were found.

Share

Please sign in first.

Sign in

Create a free account to use wishlists.

Sign in